top of page
Image by SUNBEAM PHOTOGRAPHY

ELECTRICAL

33 KV TRANSFORMERS AND HT PANELS

The HT panel receives an electrical Supply of 11KV (or 33KV) from H – the pole by means of a 3 core HT cable. It then distributes power through one or more outgoing feeders. These outgoing feeders are connected to distribution transformers that convert HT supply to 415V, 3-phase 4 wire AC supply

 

DG SETS

A diesel generator (DG), also known as a diesel genset, is the combination of a diesel engine and an electric generator (often an alternator) to generate electrical energy. This is a specific case of engine-generator. A diesel compression-ignition engine is usually designed to run on diesel fuel, but some types are adapted for other liquid fuels and even natural gas.

​

CABLE TRAY

A cable ladder or cable tray is installed in circumstances where it will carry a light cable load, possibly just one or two cables, and its main role is the physical protection of its contents.

​

LIGHTNING ARRESTER 

It protects the system from the outside and is used mainly to limit the damage caused by lightning strikes and associated surges.

 

RACEWAYS

Raceways are internal installations and one of the most common electrical components in electrical installations. They provide a safe route for cables and wires. You find raceways in the walls of most homes or office spaces.

 

BUS DUCTS

Formoplastic is a known reputed manufacturer of VFD, Automation, MCC & PCC solutions. We have now started to manufacture Low Voltage and Medium High Voltage bus ducts to meet the requirement of generating stations and industrial needs. Formoplastic is at the forefront of providing a Single Point Solution for the needs of all electrical power plants, transmission and distribution system

​

INDOOR AND OUTDOOR LIGHTING WORK

When lighting fixtures need replacement in offices, it is important to pay attention to whether the light bulbs are for indoor or outdoor use. Outdoor light bulbs are more variable. Typically, they can be used interchangeably both inside and outdoors. In contrast, indoor lights are not designed to withstand outdoor temperature changes. Discover which light bulbs are for indoor or outdoor use or both.

 

Our scope of work includes:

  • Prepare initial schematics of internal and external services

  • Prepare estimates of complete project electrical budget cost for all external and internal work

  • Post discussion with client and architects, finalisation of layouts of electrical lighting and conduit, distribution board and switchboards with individual control.

  • Calculations of electrical load in accordance with applicable norms and standards established by the local authorities to determine size of UPS, transformers and generators.

  • Preparation of complete specification of electrical equipment and accessories

  • Designing of meter room layout

  • Power system design, including panel and distribution boards, cable sizing based on voltage drop calculations, and power system diagrams (HT and LT).

  • Detailing of earthing stations

  • Preparation of lighting layout which is to include all emergency lighting, parking, street and landscape lighting.

  • Preparation of cable route, HT / LT cabling

  • Lightning arrest

  • Calculation of diesel generator ratings sizing plinth detailing layout

  • Detailing of transformer layout with sectional details

  • Detailing of Automatic Power factor correction panels

 

Erection and commissioning :

  • Transformers and HT panels

  • DG sets and ancillaries

  • Electrical switchboards

  • Relay and control panels

  • Industrial ducts upto 7400 Amps

  • Rising main and lighting ducts

  • Indoor and Outdoor light

  • Mechanical Fire and safety protection system

bottom of page